WAP-300T
COMMANDO In-Wall Access Point, Controller-Based/Stand-Alone, Touch Wi-Fi Switch, Multi-mode, 2.4 GHz 300 Mbps
3 in 1 In-Wall Access Point, 300 Mbps, 65 Users, 2.4 GHz, Build in 3*2dBi Antenna, 16 MB Flash, 64 MB RAM, Front: Touchable Wi-Fi Switch, Back: 1 * 10/100Mbps WAN, PoE Support, Operation Mode Gateway, Repeater, Wireless AP

Information

WAP-300T is a high performance, 300Mbps in-wall wireless access point with touchable Wi-Fi switch, support IEEE 802.3af PoE, install it to 86mm in-wall jack, plug and play, easy to install and provide a more stable and faster Wi-Fi coverage in hotels, dormitory and office, It work with Access Point Controller, configure wireless AP's SSID, password, RF power, channel, VLAN on a single PC, simple to maintenance in the future also, work with cloud server for advertisement and captive portal authentication for more business value.

Product Feature:

2.4GHz, 300Mbps high speed to supply abundant bandwidth

Comply with 802.11n MIMO Technology, supply 300Mbps faster data rate to high bandwidth request end users such as mobile phone, tablet...

Touchable Wi-Fi Switch, energy conservation

Simple touchable switch to control the Wi-Fi signal, Easy operation and energy conservation

In-Wall design, simple to install

In-wall design, replace the 86mm size power socket, integrated into the available decoration, With PoE power supply, plug and play, very easy to install it in the hotel, home, office....

Multiple Encryptions and Multiple Firewalls

Support 802.1x EAP, WEP/WPA/WPA2 Encryption, Support MAC filter, IP Filter, DMZ, Port forwarding to guaranty the network safety in maximum.

Centralized Management and Captive Portal

Work with WLAN Controller, centralized configuration and management, easy to achieve installation and maintenance Work with Cloud Server to do remote monitor and maintenance, advertisement and Captive Portal authentication for more business value.

Specification

Hardware

Wireless 802.11n,2T2R 300Mbps,MIMO Technology
Interface
1*10/100Mbps WAN port
1* Reset Button to restore factory default
1* Touchable Switch
Antenna Build in 2*2.4GHz MIMO Antenna
Power IEEE 802.3af 48V active PoE
Size 86mmX86mmX27mm
Data Rate 300Mbps

Firmware

Operation Mode Gateway, Repeater, AP
Network Protocol
IEEE 802.3(Ethernet)
IEEE 802.3u(Fast Ethernet)
IEEE 802.11b/g/n
Wireless Setting
Wireless Analyzer
Distance Control 802.1xACK Time output
Multi SSID up to 4
BSSID
Wireless Security
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)
Hide SSID
System Setting Web-based configuration (HTTP/Telnet)
Firmware Upgrade Upgrade firmware via web browser or TFTP
Administration Management Admin User name/Password can be configured
System Monitoring Device and Networking status statistic
System Log Support local log, host log, log file exporting
Reset Reset to factory defaults
Backup Backup device configuration, then restore this configuration if need

Working Environment

Temperature
Operating Temperature: -20°C~55°C
Storage Temperature: -40°C ~ 70°C
Humidity
Working Humidity 5%~95% RH No condensation
Storage Humidity 5%~95% RH No condensation

Awards


Certification