AIR-AP300 is an indoor ceiling mount wireless access point for Hotels, Cafe, Hospital, School, Shopping Mall and Home. Comply IEEE 802.11n 2T2R MIMO Technology, 300Mbps high speed, integrated IEEE 802.3af PoE Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available, easy installation and lower cost; Housed in a ceiling mountable case, the AIR-AP300 can be installed on a wall or ceiling to blends in nicely with most interior decorations in the house, to extend optimum wireless signal. Work with WLAN Controller, centralized configuration and management, easy to achieve Wi-Fi Coverage and maintenance, access into Cloud Server to do remote monitor and Captive Portal authentication for more business value.
300Mbps High Data Rate, High Performance and Adjustable RF Power
Equipped enterprise high performance Qualcomm Chipset, Comply IEEE 802.11n 2T2R MIMO Technology, 300Mbps high speed, allow all connected devices to achieve faster upload/download Ethernet. With powerful amplifier, improved the Wi-Fi range for some area with small quantity wireless AP, Can cut down RF power to suit for some high density wireless AP area to avoid Wi-Fi interference.
Power over Ethernet (PoE)
Integrated IEEE 802.3af Power over Ethernet (PoE), work with standard PoE switch, plug and play, installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Multiple Operation Mode for Multiple Application
Support Wireless AP, Gateway, Wi-Fi Repeater to meet with different installation requirements, such as Gateway for home use, Wi-Fi Repeater to extend the exist Wi-Fi signal to more range
Multi SSID, Tag VLAN, AC Controller Centralized Management, Cloud Server Captive Portal Authentication
Support Multi SSID up to 4, each SSID support tag VLAN for User isolation. Work with WLAN Controller, centralized configuration in IP address, SSID, Password, Tag VLAN, RF power adjustable, then remote management, easy to achieve Wi-Fi Coverage and maintenance. Besides that, access into cloud server to do advertisement and Captive Portal authentication guest, to create more business value.
|Wireless||802.11n, 2T2R 300Mbps MIMO Technology|
|2*10/100Mbps RJ45 Ports|
|1* Reset Button to restore factory default|
|Antenna||2.4GHz MIMO High Gain omni 5dBi Internal Antenna|
|Power||DC 12V/1A；PoE: IEEE 802.3af, 48V|
|Operation Mode||Gateway, Repeater, Wireless AP|
|IEEE 802.3u(Fast Ethernet)|
|Distance Control 802.1xACK Time output|
|Multi SSID up to 4|
|WEP Encryption-64/128/152 bit|
|WPA/WPA2 Personal Encryption (WPA-PSK using TKIP or AES)|
|WPA/WPA2 Enterprise Encryption (WPA-EAP using TKIP)|
|System Setting||Web-based configuration (HTTP/Telnet)|
|Firmware Upgrade||Upgrade firmware via web browser or TFTP|
|Administration Management||Admin User name/Password can be configured|
|System Monitoring||Device and Networking status statistic|
|System Log||Support local log, host log, log file exporting|
|Reset||Reset to factory defaults|
|Backup||Backup device configuration, then restore this configuration if need|
|Operating Temperature: 0°C~55°C|
|Storage Temperature: -40°C ~ 70°C|
|Working Humidity 5%~95% RH No condensation|
|Storage Humidity 5%~95% RH No condensation|